PosiTile MC Specs: ESD Carpet Tile for Access Floors

StaticSmart PosiTile MC

Carpet Description: 1 carpet tile with 4 positioning buttons to match 1 Tate™ ConCore® access floor panel.

Panel Description: ConCore® 1000 Panel with PosiLock understructure.

Positioning Mechanism: 4 Ultrasonically welded buttons.

Positioning Mechanism Rolling Load: 400 lbs. at 10,000 passes

Size: 23.98" x 23.98"

StaticSmart ESD Discovery Classic/Contempo and Conquest Series

A. Construction Factors:

Yarn oz./sq. yd.: Classic/Contempo: 24 oz., Conquest: 22 oz.

Conductive Fiber: StaticSmart FibreLink ESD conductive fiber in every tuft

Construction: CLASSIC - textured loop, straight/PSP with ECC Roll. CONTEMPO - textured graphic loop. CONQUEST - pattern loop.

Stitches per inch: Classic - 11 s.p.i., Contempo - 10 s.p.i., Conquest - 9.5 s.p.i.

Pile Height: Classic/Contempo: 6/32", Conquest: 5/32".

Fiber: Classic: Solutia LXI nylon, Contempo: Performa SD type 6 nylon, Conquest: 91% ECO solution Q BCF SD nylon / 9% yarn dyed BCF nylon w/ recycled content.

Backing: Conductive EcoWorx backing, 100% PVC-free recyclable, made from recycled material

Total Weight: Classic/Contempo: 98.98 oz./sq. yd., Conquest: 96.98 oz./sq. yd.

B. Physical Properties:

Sound Absorption Test: ASTM C423-90: Noise reduction coefficient, NRC > .25

Radiant Panel Test: ASTM E-648: Average critical radiant flux, Class 1, ≥ .45 w/cm2

NBS Smoke Test: ASTM E-662: Smoke density, < 450

C. Electrical Properties:

kV Rating: AATCC 134-1996 electrostatic propensity: Less than 2 kV. Tested at 20% relative humidity at 20° Celsius and 70° Fahrenheit.

Electrical Resistance: ESD S7.1 Resistive Characterization of Materials: Six or more readings from surface to groundable point. Tested with an applied voltage of 100V. Measured in Ohms,
1.0 x 105 minimum, 1.0 x 108 maximum

ESD S7.1 Resistance Characterization of Materials: Six or more readings between electrodes placed 1 foot apart. Tested with an applied voltage of 100V. Measured in Ohms, 2.5 x 104 minimum, 5.0 x 107 maximum

Electrical Resistance/Voltage Test ANSI/ESD S-20.20, compliant when using approved conductive footwear system. Results within recommended range < 35 x 106 Ohm or < 100 volts D.O.D. HDBK263A, Section 40.1.2: Meets recommended guidelines for sensitive ESD devices, Class 1.

For more information, please contact Julie Industries Customer Service at 978-988-8802, Monday-Friday between 8:30 am and 5:00 pm EST.